|
 |
 |
 |
 |
 |
|
 |
 |
|
Net Metering and Interconnections |
|
|
![]() |
|
![]() |
![]()
PECO has certified to the Pennsylvania Public Utility Commission that this is an accurate electronic representation of the documents which are officially filed at the Commission.
Users of electronic documents assume responsibility for reliance upon documents in electronic format.
Net Metering and Interconnection Information
Customers interested in connecting small generator facilities to the PECO transmission or distribution system must follow several procedures and meet certain requirements. A service and meter form and the appropriate interconnection applications is required.
View or download the following documents:
Tariff and Service and Meter Form:
Application Fees:
Application fees vary by Interconnection level. Click here for the table of required fees.
Interconnection Applications/Agreements:
* Applicants proposing to install generation approaching 2,000 kW or larger should contact PECO for guidance in determining the appropriate application process.
Virtual Meter Aggregation:
Use this form to apply for virtual meter aggregation.
Request Form
PECO Energy Net Metering "OUT-Meter" Reimbursement Policy:
Click here for PECO's policy.
Interconnection Guidelines:
The links below can be referenced for additional information on Exelon’s guidelines for interconnection of generators to the PECO distribution system.
Exelon Energy Delivery Interconnection Guidelines greater than 2 MVA but less than or equal to 20 MVA
For small generators with applications rated at 50kW or less, see PECO's "Yellow Book" Requirements for Parallel Operation for customers with generation not exceeding 50kW. The Yellow Book condenses requirements contained in the above listed 2 MVA or less procedure.
Transmission Facility Connection Requirements: The link below provides information on PECO's Transmission Facility Connection Requirements in compliance with NERC standard FAC-001.
ComEd and PECO Transmission Facility Connection Requirements
Additional information regarding interconnection to the Transmission System may be found at the PJM website www.pjm.com
Inquiries regarding net metering/interconnection installations should be directed to PECO by either mail, phone or email.
Requests by mail should be submitted to the appropriate PECO service location in the area service is required.
PHILADELPHIA REGION (City of Philadelphia) 830 S. Schuylkill Ave. Phila, PA 19146-2395
Phone inquiries: (215) 731-2340 (215) 731-2327 Fax
DELCHESTER REGION (Delaware, Chester & York) 1050 W. Swedesford Rd. Berwyn, PA 19312
Phone inquiries: (610) 725-7160 (610) 725-1416 Fax
BUCKSMONT REGION (Bucks & Montgomery)** 400 Park Ave. Warminster, PA 18974
Phone inquiries: (215) 956-3270 (215) 956-3240 Fax
** Lower Merion & Narberth are served by DelChester Region
For new residential construction locations with net metering/interconnection installations in all of PECO Energy's service counties, requests by mail or phone should be directed to:
PECO Energy New Residential Construction Group 400 Park Avenue Warminster, PA 18974 (215) 956-3019
General questions about net-metering can be submitted to:
netmeter_interconnects@peco-energy.com
|